RD385 horizontal directional drilling guiding system. Used to on the ground monitoring probe position. LCD display gives a full digital information and signal response to clear and easy to read to display the location of the drill bit, depth, the slope Angle, the rotation Angle, bit temperature and battery status.
RD385 data monitor
1. The remote display can make the drilling tool information in the rest area can be observed
2. The locator shows including instantaneous depth measurement, the relevant information can guarantee the success of the task and accuracy
3. 150 meters away from the receiver can be put in place of the received signal
4. Conform to the DTI (UK trade and industry) regulations
5. Data monitor can choose some accessories to increase its function
6. In the receiver and the monitors increase backing lighting function
7. The antenna can be submerged in water

Technical parameters:
1. Used for on the ground monitoring probe position
2. LCD display gives a full digital information and signal response
3. With clear and easy to read to display the location of the drill bit, depth, the slope Angle, the rotation Angle, bit temperature and battery status
4. LCD display can show probe sensor rotation Angle and the Angle of the results
5. Automatic gain control can continuous monitoring rotation Angle and dip Angle
6. Has the underground pipeline detection function
7. Cooperate with RD4000 T3 or T10 transmitter in before drilling to underground pipe and cable location, depth, and will be the main information provided to workers