RD550 pipe positioning system includes a receiver and an electronic pulse generator. Electronic pulse generator is connected in the water pipe on the fire hydrants, may to the buried depth of 2 meters of nonmetallic pipe location. In the positioning process pipeline without plugging. When measuring the required minimum pressure pipe is only 2 bar. The use of simple, no special technical requirements.
characteristics
S suitable for all piping material, such as polyvinyl chloride b
Ene, polyethylene, sorting, cast iron, steel, etc.
S not affected by electromagnetic interference
S can store up to 240000 survey data
S low energy consumption
S long service life
application
The pulse generator produces vibration wave in the homogeneous soil structure and surface fastest spreading. Usually, ground
Measuring distance for fifty to 600 m. Pulse generator can be used for pipeline layout adjustment and check, both indoor and outdoor
Can use.
RD550 quick and reliable positioning line, especially suitable for non-metallic pipe positioning.
RD550 receiver function
Receiver through the earth microphone recording in the piping is the strongest wave, and through the sound and light show its strength.
Pulse generator function
Pulse generator and the water is linked together, in the hydraulic pressure and water, under the action of pulse generator valve switch per minute
Sixty times. Through the booster and decompression process, they generate pressure wave, this sound waves to one dimensional longitudinal compression wave form along
Pipeline transmission, by listening to leak instrument in the ground has been received.

Technical parameters:
Pipe internal required minimum pressure 2 bar
Power supply box one battery
Operating time 12 hours
The weight of 4.2 kg
Connection 1 inch interface
Pulse frequency per minute sixty pulse signal