RD560 pipeline gas leakage detector can pinpoint the tiny leakage. Will target pipeline detection partially filled with hydrogen, slow increase pressure. Due to the molecular structure of small hydrogen etc, it can penetrate almost any material. Measuring time with the size of the leakage, soil types, surface structure and different. The location of the highest concentration of gas is one of pipeline leakage position. Normally, the ground detected leakage position and actual leak position deviation is less than a few centimeters.
application
Inside the residence pipeline, such as:
S heat pipe
S geothermal system
S pipe
Pipeline construction
S gas pipeline
S pipe
S district heating pipe
characteristics
S regional noise monitoring
S mobile unit rapid positioning leakage
S hearing protection
S wide coverage area
S recorder battery life for ten years
S receiver can be installed on the inspection
S data with GPS and digital map connection

Technical parameters:
Electronic unit microprocessor control
Sensor 0-2000 PPM
Battery rechargeable nickel hydrogen battery
Suction pump rotary plunger pump
Alarm indication when the device is open, sound and light alarm instructions to open. Sound alarm indicator can be closed by manual. The following situation, will alarm:
S pump in the water
S fault
S gas concentration is too big
Emergency alarm alarm limit can be according to the measuring range alone setting reset according to "reset" button, all measurement data to zero
Instrument box coating aluminum box
Size and cm x 0.8 cm x 12 cm
Weight about 2 kilograms