NT9600G online turbidimeter
Typical applications
Turbidity measurement of filter backwash water, raw water and sedimentation tank effluent in waterworks;
Industrial production process, the quality of circulating cooling water.
● use scattered light and transmitted light detection technology
● optional self-cleaning (air or water flushing) function
● Chinese/English intelligent menu operation
● data recording/uploading function
● a variety of automatic calibration functions
● three sets of relay control switches
● high limit, low limit, hysteresis control
● 4-20ma /RS485 various signal output modes
Technical parameters:
(1) measuring range:
Input type: 0 ~ 400 ~ 2000 ~ 4000NTU;
Temperature: 0 ~ 50.0℃;
(2) unit selection: NTU;
Mg/L;
(3) resolution: turbidity: 0.001NTU;
Temperature: 0.1℃;
(4) basic error: turbidity: ±1%F.S;
Temperature: ±0.3℃;
(5) two-channel current output:
0/4 ~ 20 ma (load resistance < 750 Ω);
(6) communication output: RS485 MODBUS RTU;
(7) three sets of relay control contacts:
5A 250VAC, 5A 30VDC;
(8) power supply (optional) :
85 ~ 265VAC±10%,50±1Hz, power ≤3W;
9 ~ 36VDC, power: ≤3W;
(9) external dimension of the instrument: 144×144×118mm;
(10) instrument installation: disk-mounted, wall-mounted and duct-mounted;
Installation opening size: 138×138mm;
(11) protection grade: IP65;
(12) weight of instrument: 0.8kg;
(13) instrument working environment:
Ambient temperature: -10 ~ 60℃;
Relative humidity: no more than 90%;
There is no strong magnetic field interference except the earth's magnetic field.
Whole house mineralized water system
