NT9600E/9600F low range turbidimeter
Typical applications
Turbidity monitoring of water from waterworks;
Monitoring water quality of municipal pipe network;
Industrial process water quality monitoring, circulating cooling water, activated carbon filter effluent, membrane filter effluent, etc
Instrument features:
● simple cleaning and maintenance;
Correct it every three months
● good repeatability, not affected by sample velocity and pressure
● multi-point correction method to ensure measurement accuracy
● Chinese/English intelligent menu operation
● data recording/uploading function
● 4-20ma /RS485 multiple connection modes
● password protection can be set to prevent non-staff from misoperation
(1) measurement range: turbidity: 0.001 ~ 20 ~ 200NTU;
Temperature: 0 ~ 50.0℃;
(2) unit selection: NTU;
Mg/L;
(3) maximum resolution: turbidity: 0.001NTU;
Temperature: 0.1℃;
(4) basic error: turbidity: ±1%F.S;
Temperature: ±0.3℃;
(5) two-channel current output:
0/4 ~ 20 ma (load resistance < 750 Ω);
(6) communication output: RS485 MODBUS RTU;
(7) three sets of relay control contacts:
5A 250VAC, 5A 30VDC;
(8) power supply (optional) :
85 ~ 265VAC±10%,50±1Hz, power ≤3W;
9 ~ 36VDC, power: ≤3W;
(9) overall dimensions:
NT9600E size: 144×144×118mm;
9600FSize: 400*300*170mm;
Filter tank size: 220*150*80mm;
(10) installation method:
NT9600E installation mode: wall hanging, disk installation;
Installation mode: wall hanging;
Installation method: wall hanging;
(11) weight:
NT9600E weight: 0.8kg;
9600FWeight: about 5.5kg;
Weight of follicular groove: about 1.0KG;
(12) protection grade: IP65;
Signal line length: 10m;
(14) instrument working environment:
Ambient temperature: -10 ~ 60℃;
Relative humidity: no more than 90%;
Whole house mineralized water system
