OMD - 2005 oil in water analyzer/Germany Deckma oil concentration in water alarming device. "the measuring accuracy of 15 PPM cabin alarming device in IOPP certificate (international oil pollution prevention) test should be tested according to the manufacturer's instructions, or use a 15 PPM alarming device to replace the cabin correction. 15 PPM cabin alarming device calibration certificate, date of last calibration should be retained on board for checking. Accurate confirmed only by the manufacturer or its authorized personnel can performOMD - 2005 data recorder at least 18 months to collect and store the following information:- GMT Greenwich mean time (date & time)- separator working status on/off (0) (1)15 PPM alarm on/off (0) (1)- other devices (on/off to other devices that require the use of such as the overboard discharge valve position)- oil concentration (0 to 30 PPM)Measuring range: 0-30 PPMAccuracy of measurement, in line with international maritime organization MEPC. 107 (49)Linear degrees: < 2%Show: green graphic LCD displayPower source: 24 V - 240 VAC or DC, automatic voltage selectionWork rate: < 15 VAEmergency alarm 1 + 2: adjustable between 1-15 PPM (the default value is 15 parts per million (PPM)Emergency alarm 1 operation delay (for alarm) : adjustable between 1-540 seconds (the default value is 2 seconds)Emergency alarm 2 operation delay (for control) : adjustable between 1-20 seconds (the default is 10 seconds)System fault alarm: red LED displayAlarm contacts power: passive relay, 3 A / 240 VAlarm indication: red LED displayOutput signals: 0/4-20 mA, maximum load < 150 ΩSample pressure: 0, 1-10 barSample flow: about 0, 1-4 l/m depends on the pressureTemperature: + 1 to + 55 cThe sample temperature: + 1 to + 65 cTemperature changes: the biggest 45 cOr: 360 mm wide x 240 mm x 100 mm deepIP protection grade: 65Weight: 7.3 kgPipe connection: R "internal thread